0845 055 0051
 |
The standard beam is 75 mm. A 90 mm deep beam is available for higher loadings. To guard against accidental dislodgement, a safety pin is inserted through the beam bracket and concealed behind the upright. |
 |
Frames are supplied with a 2.5 mm galvatite footplate (67.5 mm wide x 47 mm deep). This can be bolted to the ground where required. |
 |
Uprights are 63 mm wide x 45 mm deep x 1.6 mm thick with a capacity up to 7000 kg subject to the height of the first beam level. Bracing is fixed to the uprights by means of rivets. Upright slots are on a 50 mm vertical pitch allowing greater flexibility for the placement of beam levels. |
| Beam Profiles | |
 |
 |
| Standard Beam | Extra Heavy Duty Beam |
System Shelfplan is comprised of two standard components, frames and beams, which can be used to build starter and extension bays to suit any storage requirement. Standard Bays are supplied with galvatite steel shelf panels.
| Starter and Extension Bays | |
 |
 |
| 3-Beam | 4-Beam |
| Choice of Four Shelves | ||||
 |
 |
 |
 |
|
| Galvatite Steel Shelves |
25 mm Chipboard Shelves |
25 mm Melamine Faced Shelves |
Mesh Shelves |
|
| Shelves are produced from galvatite material with a zinc coating that provides excellent protection against corrosion and abrasion. Shelves are supplied in various sizes to suit different requirements. | An economical and hardwearing shelf which is ideal for archive storage, stationery stores, packaging etc. | Provide a wipe clean surface where high levels of cleanliness are required such as in pharmaceutical or electronic industries. | Mesh shelf panels 50 x 50 mm provide excellent air flow around stored products and also suit installations where a sprinkler system is in operation. Custom sizes available for use with step or box beams. | |
| Choice of Four Accessories | ||||
 |
 |
 |
 |
|
| End Panels |
Hanging Garment Rails |
Universal Drawers |
Dividers |
|
| MFC panels can be attached to outside frames in a run to achieve a closed/clad effect. The attractive finish makes them an ideal choice for office and retail environments. | Are available in standard duty 27 mm or heavy duty 33 mm diameter tube with System Shelfplan brackets. (Other diameter tubes can be supplied for special applications). | Full width storage drawers can be fitted into shelving bays and are ideal for small parts and component storage. | Full and half height dividers can be fitted to single runs of deep shelving. This creates a double run, reducing the number of frames and beams required in the installation. | |
Order System Shelfplan shelving products from our online catalogue.
© Eastern Storage Equipment, Ltd. 2005-2008