For fixing stainless steel changing room benches to the floor.

Our 304 grade dull polished Stainless Steel range Mezzo, Solo and Duo sided bench seats come with plastic caps as feet as standard to enable the benches to be moved around when needed.

This floor fixing foot option is factory fitted to the base of the large square leg and enables the bench to be fixed securely to the floor, which is ideal for changing areas / clean rooms or production areas that you would prefer the bench to be secured in.

Sold singularly, four SFFC floor cleats are required for each 1m, 1.5m or 2m bench, but you need six for 2.5m or 3m long as they have an additional set of middle legs for optimum strength.

The feet / cleats have chamfered edges, a 7mm hole to accept a No10 screw or M6 floor fixing (not supplied) and are ideal for use in a variety of different commercial applications, including swimming pools, leisure centres, food preparation areas or hospitals, in fact virtually anywhere with high humidity or lots of water (for external use near the sea or areas where concentrated chemicals are used we can manufacture in 316 grade stainless at an additional cost).

Please Note: If fixing these benches to the floor please make sure you check there is not underfloor heating underneath, to avoid any embarrassment shortly after fixing (once bitten never forgotten)!It is also worth applying silicone sealant to the underside of the floor cleat before screwing down to seal it from water.